Search results
This guideline will cover installation requirements and additional accessories needed for split system installations where the line set exceeds 80 feet (24.4 m) in actual length. The long line sets can have three different configurations (1) Outdoor unit and Indoor unit are at the same level, (2) Outdoor unit is above the Indoor unit coil, (3) ...
Most refrigerant tubing kits are supplied with 3/8” thick insulation on the suction line. For long line installations over 80 feet, if the line set passes through a high ambient temperature zone, 1/2” thick suction line insulation is required to reduce loss of capacity.
1 – 208/240 V, 1 PH 3 – 208/240 V, 3 PH 4 – 480 V, 3 PH The following procedure must be followed to insure proper installation: 1. Shut off power to the unit. 2. Remove the control and blower access panels. 3. Remove the blower block-off panel (save the four screws). 4a. Remove HK control box cover. 4b.
Ductwork-Use UL 181 listed flex duct (Goodman Quietflex). NOTE: Duct must maintain a 1" minimum clearance to any adjacent material for the first 30" of supply Duct.
split system matches of nominal capacity 18,000 to 60,000 Btuh. This guideline will cover installation requirements and additional accessories needed for split system installations where the line set exceeds 80 feet in actual length. Accessories For Lines Greater Than 80 Feet: 1.
The Goodman literature library has consumer brochures and technical specifications for various Goodman HVAC models and product lines.
Hex Castle Nuts: Dimensions (ANSI B18.2.2 1970) Nominal or Basic Major Diameter of Thread. Click on the size to shop products. Width Across Flats (F)
