Search results
Open trigger gun for flow of water through nozzles. Nozzles must have flowing spray. If not, remove tips and clean; reassemble, making sure that groove of nozzle is parallel to spray bar. Use thread sealant when installing nozzles. 4. Start Pressure Washer. The Hammerhead is ready for operation. 5. Walk slowly behind the Hammerhead cleaning as ...
Open trigger gun for flow of water through nozzles. Nozzles must have flowing spray. If not, remove tips and clean; reassemble, making sure that groove of nozzle is parallel to spray bar. Use thread sealant when installing nozzles. 3. Start Pressure Washer. The Hammerhead is ready for operation. 4. Walk slowly behind the Hammerhead cleaning as ...
Open trigger gun for flow of water through nozzles. Nozzles must have flowing spray. If not, remove tips and clean; reassemble, making sure that groove of nozzle is parallel to spray bar. Use thread sealant when installing nozzles. 7. Start Pressure Washer. The Hammerhead is ready for operation. 8. Walk slowly behind the Hammerhead cleaning as ...
Get great control over your GP surface cleaner with this compensating trigger spray gun. A genuine General Pump for compatibility with GP surface cleaners. Handles a maximum pressure of 4000 PSI and a maximum flow rate of 8 GPM. Inlet port measures 3/8-inch FNPT.
General Pump DCG4000FSC IN-LINE Flat Surface Cleaner Gun for use with 20 in. GP HAMMERHEAD Surface Cleaners (20 in. Mfg. after 12-31-10) and (18 in. Mfg. after 10-1-13). Supersedes DG4000FSC. Rated at 4000 PSI, 8 GPM.
Instructions. Connect to Pressure Washer. must Turn have water flowing on and spray. open valve. If not, Open remove trigger nozzle is parallel to spray bar. Use thread sealant when installing nozzles. tips and gun clean; for flow reassemble, of water through making nozzles. sure that Nozzles groove of. Start Pressure Washer.
General Pump DCG4000FSC Compensating Trigger Gun for 20 in. Hammerhead Surface Cleaner. $49.97.
