Search results
General Pump 1174 Northland Drive • Mendota Heights, MN 55120 Phone: 651.686.2199 • Fax: 800.535.1745 www.generalpump.com • sales@gpcompanies.com Operating Instructions 1. Connect inlet filter to FSC gun inlet. 2. Connect to Pressure Washer. 3. Turn water on and open valve. Open trigger gun for flow of water through nozzles. Nozzles
tips and clean; reassemble, making sure that groove of nozzle is parallel to spray bar. Use thread sealant when installing nozzles. 3. Start Pressure Washer. The Hammerhead is ready for operation. 4. Walk slowly behind the Hammerhead cleaning as you go. If striping occurs, slow down your pace. 5. Periodically check weep hole on bottom of swivel ...
For the DCFSCP18GZ only: Grease the swivel with one or two grease gun pumps every 200 hours (or once about every 30 days of use). Use No. 2 general purpose waterproof lithium
GENERAL PUMP A member of the Interpump Group DFSCP12E Flat Surface Cleaner 1. Connect directly to gun, lance or telescoping wand. 2. Turn water on and open trigger gun for flow of water through nozzles. Nozzles must have flowing spray. If not, remove tips and clean; reassemble, making sure nozzle groove is parallel to spray bar. Use thread
PART. PROFESSIONAL FLAT SURFACE CLEANER. FROM GENERAL PUMP. COMPENSATING GUN FEATURE. FULL 20” CLEANING PATH. HEAVY-DUTY ALUMINUM COMPONENTS ANODIZED. RUGGED ABS COVER. SWIVEL FOR BEARING HAS GREASE LUBRICATION. OPERATOR’S DCFSCP20GZ MANUAL. General Pump is a member Interpump of Group the. Ref 300843 Rev.F. WARNING: Read Before Operating Machine.
11. For the DCFSCP20GZ only: Grease the swivel with one or two grease gun pumps every 200 hours (or once about every 30 days of use). Use No. 2 general purpose waterproof lithium grease. For hot water applications, use a high quality high temperature grease. NOTE: after 50 hours of use, remove the in-line filter, take apart and clean filter screen.
Grease the swivel with one or two grease gun pumps every 200 hours (or once about every 30 days of use). NOTE: After 50 hours of use, remove the inlet filter, take apart and clean
