Search results
Operating Instructions 1. Connect inlet filter to FSC gun inlet. 2. Connect to Pressure Washer. 3. Turn water on and open valve. Open trigger gun for flow of water through nozzles. Nozzles must have flowing spray. If not, remove tips and clean; reassemble, making sure that groove of nozzle is parallel to spray bar.
Operating Instructions 1. Connect to Pressure Washer. 2. Turn water on and open valve. Open trigger gun for flow of water through nozzles. Nozzles must have flowing spray. If not, remove tips and clean; reassemble, making sure that groove of nozzle is parallel to spray bar. Use thread sealant when installing nozzles. 3. Start Pressure Washer.
View and Download General Pump DCFSCP20 The Hammerhead operator's manual online. PROFESSIONAL FLAT SURFACE CLEANER. DCFSCP20 The Hammerhead floor machine pdf manual download.
Operating Instructions. Bolt four the washers. two halves of the handle together with the two M6 x 60mm long bolts, nylok nuts and. Connect the handle to the brackets on the deck with the two 55mm long pins and rings. Using thread sealant on hose’s male threads, connect the hose to the swivel on the deck.
General Pump 1174 Northland Drive • Mendota Heights, MN 55120 Phone: 651.686.2199 • Fax: 800.535.1745 www.generalpump.com • sales@gpcompanies.com Ref 300843 Rev.F 05-16 Operating Instructions 1.Bolt the two halves of the handle together with the two M6 x 60mm long bolts, nylok nuts and four washers.
Operating Instructions 1. Connect inlet filter, D40014 to FSC gun inlet. 2. Connect to Pressure Washer. 3. Turn water on and open valve. Open trigger gun for flow of water through nozzles. Nozzles must have flowing spray. If not, remove tips and clean; reassemble, making sure that groove of nozzle is parallel to spray bar.
PROFESSIONAL FLAT SURFACE CLEANER 8 DFSCP12 OPERATOR’S MANUAL GeneralPumpisa memberof ... Tampering with any part of this machine will void all warranties FROM GENERAL PUMP • full 12” Cleaning path • can be connected directly to a gun, lance or telescoping wand ... Layout 1 Created Date: 1/25/2011 10:50:53 AM ...
