Search results
PROFESSIONAL FLAT SURFACE CLEANER 8 DCFSCP20 Model: 2100303 & DCFSCP20GZ OPERATOR’S MANUAL General Pump is a member of the Interpump Group WARNING: Read Before Operating Machine Always wear protective eyewear Keep clear of rotating nozzles Never lock trigger gun open with any device Drain water in cold weather to avoid freezing
- SPECIFICATIONS FLAT SURFACE CLEANER
NOTE: after 50 hours of use, remove the in-line filter, take...
- SPECIFICATIONS FLAT SURFACE CLEANER
The flat surface cleaner is now ready for operation. • 2 nozzle arm: contains quantity 2, #2.0 nozzles which is a #4.0 nozzle equivalent. • 3 nozzle arm: contains quantity 3, #2.0 nozzles which is a #6.0 nozzle equivalent.
NOTE: after 50 hours of use, remove the in-line filter, take apart and clean filter screen. DO NOT ALLOW MACHINE TO REMAIN STATIONARY ON SOFT SURFACES SUCH AS WOOD.
Operating Instructions. Bolt four the washers. two halves of the handle together with the two M6 x 60mm long bolts, nylok nuts and. Connect the handle to the brackets on the deck with the two 55mm long pins and rings. Using thread sealant on hose’s male threads, connect the hose to the swivel on the deck.
Instructions. Connect to Pressure Washer. must Turn have water flowing on and spray. open valve. If not, Open remove trigger nozzle is parallel to spray bar. Use thread sealant when installing nozzles. tips and gun clean; for flow reassemble, of water through making nozzles. sure that Nozzles groove of. Start Pressure Washer.
PROFESSIONAL FLAT SURFACE CLEANER 8 DCFSCP20 OPERATOR’S MANUAL GeneralPumpisa memberof ... General Pump 25 2203507 Washer,M6,SST,Lock 1 1174NorthlandDrive • MendotaHeights,MN55120 Phone:651.686.2199 • Fax:800.535.1745 ... Layout 1 Created Date:
For the DCFSCP20GZ only: Grease the swivel with one or two grease gun pumps every 200 hours (or once about every 30 days of use). Use No. 2 general purpose waterproof lithium
