Search results
Based on the catalog breaking strength of wire rope, Crosby wire rope clips have an efficiency rating of 80% for 3mm through 22mm sizes, and 90% for sizes 24mm through 90mm. Entire clip is galvanized to resist corrosive and rusting action. Sizes 3mm through 62mm and 75mm have forged bases.
Correct Fitting of Wire Rope Clamps. The wire rope clip should be fitted to the wire rope as shown schematically in the figures. The bridge of the clip should invariably be fitted on the working part of the rope, and the U-bolt on the rope tail or dead end of the rope.
Based on the catalog breaking strength of wire rope, Crosby wire rope clips have an efficiency rating of 80% for 1/8” through 7/8” sizes, and 90% for sizes 1” through 3-1/2”. Entire Clip is Galvanized to resist corrosive and rusting action. Sizes 1/8” through 2-1/2” and 3” have forged bases.
See Crosby's product listing of wire rope end fittings including clips, wedge sockets, sleeves, shank hooks and more - perfect for the material handling industry.
Available in six sizes from 1/2” to 1-1/2” (13mm - 38mm). Button Spelter terminations have a 100% efficiency rating, based on the catalog strength of the wire rope. Designed for use with mobile cranes. Can be used to terminate high performance, rotation resistant ropes, and standard 6 strand ropes.
the minimum breaking force of wire rope. The efficiency rating of a properly prepared loop or thimble-eye termination for clip sizes 1/8” through 7/8” is 80%, and for sizes 1” through 3-1/2” is 90%. The number of clips shown (see Table 1) is based upon using RRL or RLL wire rope, 6 x 19 or 6 x 36 Class, FC or IWRC; IPS or XIP, XXIP.
Size of clamps is selected based on the diameter of the wire rope. Wire rope clamp meeting the requirements of DIN741 and refers to a lightweight class, and is recommended for use in operations that does not involve significant loads on connection.
