Search results
G-Series pipe thread chart (British standard pipe parallel was BSPP & BSPF) and PF-Series pipe thread chart (Japanese pipe parallel).
The most common G 1/4″ threads at WIKA are surely the G 1/4 in accordance with EN 837 or DIN 3852-E. But in addition there are many other pressure connections which are all specified as G 1/4″. For example G 1/4 Ermeto and G 1/4 DIN 3852-A, just to name two.
BSPP G 1/4 : Brith Pipe (BSP) Thread Dimensions and Tolerances. All the relevant data for this tread in one spot.
4 kwi 2023 · Thread G: The G (Whitworth) thread, also called BSPP (British Standard Pipe Parallel) is a parallel thread used in Europe. It is used for pipe fittings and hydraulic fittings. The G thread is characterized by its right angle and size indicated in inches. Here is a correspondence table for G fittings, with male and female diameters in millimeters:
BSPP thread is often referred to as “G” threads, the two types of thread are the same parallel straight, the threads are measured in threads per inch. Therefore, BSPP is the same as G.
The most common types of Whitworth thread are: BSPP (G) – British Standard Pipe Parallel. BSPT (R/Rp) – British Standard Tapered Pipe, for pipes and tapered thread. An appropriate sealing compound can be used in the thread to ensure a leakproof joint.
To get an accurate value, ensure that the thread pitch gauge is fitting well on the threads. Record the values and compare your measurements with the figures provided in this guide. Accurate measurement of four-bolt flanges. Begin by using a caliper to measure the port hole diameter the bolt.
