Search results
To access the camera locally right click it, choose Network Configuration and set the camera up with the same static IP with the same network segment as the computer.
Take hostname ycxgwp.no-ip.info, user name foscam, password foscam2012 for example. Firstly, goes to option of DDNS Service Settings on the administrator panel. Secondly, select No-Ip as a server.
This guide shows the procedure on how to set a static IP address for a Foscam camera. There are two IP modes on IP cameras: static which is set manually by the user and DHCP which means the IP address is assigned automatically by the router.
In this article, I show how to set up a static IP address for a Foscam camera. It's possible to set up an IP address for any network device either manually or automatically and for a Foscam IP camera is not different.
First of all, please make sure whether your ISP (Internet Service Provider) provides a Static WAN IP address service or a Dynamic WAN IP address service. We divide two sections of Remote Access Settings by Static WAN IP Service and Dynamic WAN IP
Enter the LAN IP address of the router (LINKSYS WRT54G, such as: default LAN IP is 192.168.1.1) in the address bar of the IE to login the router; Open the Status page to find out the WAN address of the router. In this example, the address is 183.37.28.254.
