Search results
Rifles with no drop in the stock, with the cheek rest directly in line with the top of the actions, such as AR15/AR10 require a higher scope mount for the shooter to get a proper cheek weld. The only suitable ring height is the MSR height. Typical Ring Heights used: Cantilever Mount.
Determine the height of the rings required to mount your scope based on the front objective diameter of the scope, profile of the rifle barrel, and the type of rifle action. The goal is to have the objective of the scope as close as possible to the barrel without touching. Determine the ring diameter required to fit the scope maintube diameter ...
Scope ring height calculator to determine the correct ring height for the bases you are using. Input scope diameter, tube size and base height for results.
RING HEIGHT (for bolt-action semi-auto hunting rifles) OBJECTIVE SIZE. GENERAL FIT. EXCEPTIONS. 56mm. Super high. High on some bolt action rifles.
Integral anti-cant bubble level in top half of ring. Integral bottom recoil lug for best alignment and a secure zero under the harshest recoil. Approximately 4.41 oz. with screws (pair 30mm low). 7075-T6 aluminum, Mil-Spec, Type III, 30-micron hard anodized finish – matte black.
• You should test position the scope for the proper eye relief. The scope rings should be left loose enough so that the scope will slide easily. Variable power scopes should be set at the highest magnification when performing this procedure. Mount the rifle and look through the scope in your normal shooting position.
20 kwi 2021 · Determine the height of your rings (low, medium, or high) based on the objective diameter of your scope, the profile of the rifle barrel, and the rifle's action. The goal is to get your scope as low as possible without touching the barrel.
