Search results
3 Answers. Sorted by: 15. WDS is supposed to be guaranteed to work if both devices support it. The other AP must be specifically configured for WDS mode and for the hardware address of this device. The two APs synchronize their lists of clients, and each accept traffic from (and for) each other's clients. It's the official "right way" to do things.
2 paź 2024 · If you have radios/spectrum to spare the two WDS on different channels certainly is an easy method. If you're already talking sending data over two 5ghz links between two or four AP's. Perhaps a more elegant solution is using batman iv with vlans and going for a mesh topology.
12 sie 2021 · 1) Go to Advanced > System Tools > System Parameters and focus on the 2.4GHz Wireless section, click Enable WDS Bridging. 2) Click Survey , locate the root router’s SSID, and click Choose (Here we take TP-Link_4F98 as an example).
24 paź 2024 · Go to Network, Interfaces, Devices tab, Configure... on br-lan, Advanced device options and enable STP. Failing to do so can allow a network loop to form that will take down all routers. Finally, add a new Wi-Fi network if you want to enable wireless access to the network.
19 wrz 2022 · Are you saying you want to extend the Archer C50's Wi-Fi by connecting the old WR841N via WDS bridging? If that is the case, there is no need to enable the WDS bridging on the Archer C50, instead, you need to enable the WDS bridging on the WR841N to connect to the C50 wirelessly.
24 cze 2011 · Yes, you have to configure OpenWrt to know to do WDS bridging to the TP-Link TL-WR1043ND. Unfortunately WDS is notoriously under-specified and thus differently implemented between different Wi-Fi chipsets, and thus not always compatible, even with the heroic efforts of aftermarket firmware distros.
WDS (Wireless Distribution System) is a means to transparently bridge wireless APs. What exactly does transparent bridging mean? A transparent bridge is basically turning your wireless links into an ethernet cable. It takes anything put into one side and spits it out on the other. This is great for connecting two locations.
