Search results
15 lis 2015 · One convenient ready-made USB Serial Adapter is the FTDI TTL-232RG-VIP-WE. It comes as a USB shaped device with six bare wires. The yellow, orange and black wires can be connected up as shown in the earlier diagram. The red wire is connected to 1.8, 3.3 or 5V depending on the required logic levels.
A 1 dollar usb to TTL serial converter would be the best choice for a project. If you really want to go about it, Microchip has a USB to CDC/Serial framework for their usb enabled Pic processors. And there are open source framework/libraries for the same on ATTiny/ATmegas and msp430 and other chips. – Passerby.
There are two ways – go and buy a USB to COM adapter or build one. So if you decided to build a USB to COM (RS232) adapter, there is one solution. This adapter is straightforward to build as there is a single-chip USB to UART bridge (CP2102). This chip from Silicon Labs supports USB2.0 full speed.
24 mar 2024 · Building your own USB to serial adapter is a practical DIY project that provides both educational value and functional utility. By following the steps outlined in this guide and using the right materials and tools, you can create a custom adapter tailored to your specific needs.
9 mar 2012 · Build Your Own USB To Serial Dongle. [Johan von Konow] found that he was using an FTDI USB-to-Serial chip in a lot of his projects and wanted to have an easy prototyping component on...
So, I would require a Serial to USB converter. How do I create a Serial to USB converter? Does it work at any baud rate, etc or is it fixed? Can I access USB using hyperterminal, teraterm, minicom, etc or do I need some other software? Any other considerations?
DIY USB to RS232 Adapter. Sometimes you just need to connect some device to COM port, but computer don’t have one especially laptop. There are two ways – go and buy USB – COM adapter or build one. So if you decided to build USB to COM (RS232) adapter, there is one of solutions.
