Search results
16 lis 2012 · Directv receiver says 60 tilt 36 elevation. Messing with the tilt gets me 101/110 or 110/119 at the same time but I cannot get 101/110/119 at the same time which means my tilt must be off. Need the setting for zip code 256xx.
18 paź 2011 · Go to www.dishpointer.com and put in your location (you can select the photo version if you like) and the dish type. With the HR24, that would likely be either Directv SL3 or SL5. The result will give both true and magnetic. Set the elevation and tilt.
22 wrz 2017 · Fine-tune the alignment of your dish to acquire the strongest possible signal. Turn the volume on your television up so you can hear the signal tone outside, or have a friend or family member alert you when the tone is continuous.
9 lip 2023 · Over the last three trips, I have not been able to find any signal strength, going so far as to replace the LNB, thinking it might have had a problem. Even with the new one, no signal strength. Thoughts?
The Direct TV Satellite dish works great when properly pointed. The dish requires a line-of-sight connection and the correct alignment angle to receive the best possible signal. Direct TV offers alignment as a service to optimize the angle, but you can also work the angle yourself.
11 wrz 2013 · If you’ve set elevation and tilt properly you should be getting some signal on the satellite you’re listening for. From here make very small adjustments to fine-tune what you’re seeing. The Slimline-3 is much easier to aim because the three satellite locations it uses are much closer together.
Go to the on-screen "Dish Pointing" menu. Access the signal meter to verify you are getting a signal from the dish. If not, adjust the azimuth setting until you receive a signal.
