Search results
18 paź 2011 · Go to www.dishpointer.com and put in your location (you can select the photo version if you like) and the dish type. With the HR24, that would likely be either Directv SL3 or SL5. The result will give both true and magnetic. Set the elevation and tilt.
9 lip 2023 · Over the last three trips, I have not been able to find any signal strength, going so far as to replace the LNB, thinking it might have had a problem. Even with the new one, no signal strength. Thoughts?
22 wrz 2017 · Fine-tune the alignment of your dish to acquire the strongest possible signal. Turn the volume on your television up so you can hear the signal tone outside, or have a friend or family member alert you when the tone is continuous.
I've done several dish mounts this way and haven't had any problems getting a signal, consistently 90's+ for signal strength for all satellites. A couple years ago I had a tech come out for a replacement receiver and he thought he needed to check the signal with his fancy tools.
11 wrz 2013 · If you’ve set elevation and tilt properly you should be getting some signal on the satellite you’re listening for. From here make very small adjustments to fine-tune what you’re seeing. The Slimline-3 is much easier to aim because the three satellite locations it uses are much closer together.
How to point your satellite dish. To receive DIRECTV broadcast signals, your satellite dish must be correctly positioned. This tool can help you position your DIRECTV dish on your own. Start by entering your five-digit ZIP Code below.
16 lis 2012 · Directv receiver says 60 tilt 36 elevation. Messing with the tilt gets me 101/110 or 110/119 at the same time but I cannot get 101/110/119 at the same time which means my tilt must be off. Need the setting for zip code 256xx.
