Search results
16 lis 2012 · Directv receiver says 60 tilt 36 elevation. Messing with the tilt gets me 101/110 or 110/119 at the same time but I cannot get 101/110/119 at the same time which means my tilt must be off. Need the setting for zip code 256xx.
9 lis 2011 · Set the elevation and tilt to the markings on the dish. Use a compass and set the azimuth about 10 degrees East of the recommended setting. Slowly, a degree at a time, move the dish to the West until you get signals on the 101 satellite.
22 wrz 2017 · Use the buttons on your receiver or the remote to access the Direct TV Menu. Select “Fav’s & Setup,” then “System Setup.” Select “Satellite,” then select “Repeat Satellite Setup.” Enter your zip code and write down the numbers displayed for azimuth, elevation and tilt.
24 wrz 2024 · Be patient and take your time to ensure that the dish is aligned correctly. You may need to make adjustments to the dish’s position, azimuth, and elevation values to achieve the best possible signal. With practice and patience, you can successfully align your DIRECTV dish without a meter.
11 wrz 2013 · Most options will reset themselves after the meter is turned off and on. The only one that sticks is the Favorites list. To turn the meter off, press and hold the OK button. If the meter is plugged in, unplug it, turn it off by pressing and holding the OK button then plugging the meter in.
When you subscribe to DirecTV and receive your satellite dish, be sure to aim it properly to receive a strong signal. A DirecTV professional installer can handle this task, or you can do it yourself. The main necessity is the left-to-right positioning coordinates known as your azimuth and elevation.
To receive DIRECTV broadcast signals, your satellite dish must be correctly positioned. This tool can help you position your DIRECTV dish on your own. Start by entering your five-digit ZIP Code below.
