Search results
16 lis 2012 · I am trying to figure out the tilt setting for a slimline dish with a phase 3 lnb. I need to receive 101 and 119. I never had an issue setting up the phase 3 dishes in the past when there was the phase 3 lnb with the phase 3 dish but having some issues with this one. Directv receiver says 60 tilt 36 elevation.
20 wrz 2011 · There are two ways to get the dish settings for any location that you need. 1) In your current setup, go to menue>favs&sat>system setup>satellite>repeat setup> on the right, select dish pointing>enter zip code, select okey, then select the type of dish you are using, with the correct switch type.
The Direct TV Satellite dish works great when properly pointed. The dish requires a line-of-sight connection and the correct alignment angle to receive the best possible signal. Direct TV offers alignment as a service to optimize the angle, but you can also work the angle yourself.
So the process would be this: loosen the 4, loosen the 3 that tighten the back to the pole and sweep until you get some signal. You'd wanna keep going until you get as low as possible but in this case we just want some signal.
22 wrz 2017 · Use the buttons on your receiver or the remote to access the Direct TV Menu. Select “Fav’s & Setup,” then “System Setup.” Select “Satellite,” then select “Repeat Satellite Setup.” Enter your zip code and write down the numbers displayed for azimuth, elevation and tilt.
How to point your satellite dish. To receive DIRECTV broadcast signals, your satellite dish must be correctly positioned. This tool can help you position your DIRECTV dish on your own. Start by entering your five-digit ZIP Code below.
When you subscribe to DirecTV and receive your satellite dish, be sure to aim it properly to receive a strong signal. A DirecTV professional installer can handle this task, or you can do it yourself. The main necessity is the left-to-right positioning coordinates known as your azimuth and elevation.
