Search results
20 wrz 2011 · There are two ways to get the dish settings for any location that you need. 1) In your current setup, go to menue>favs&sat>system setup>satellite>repeat setup> on the right, select dish pointing>enter zip code, select okey, then select the type of dish you are using, with the correct switch type.
16 lis 2012 · Directv receiver says 60 tilt 36 elevation. Messing with the tilt gets me 101/110 or 110/119 at the same time but I cannot get 101/110/119 at the same time which means my tilt must be off. Need the setting for zip code 256xx.
The Direct TV Satellite dish works great when properly pointed. The dish requires a line-of-sight connection and the correct alignment angle to receive the best possible signal. Direct TV offers alignment as a service to optimize the angle, but you can also work the angle yourself.
22 wrz 2017 · Use the buttons on your receiver or the remote to access the Direct TV Menu. Select “Fav’s & Setup,” then “System Setup.” Select “Satellite,” then select “Repeat Satellite Setup.” Enter your zip code and write down the numbers displayed for azimuth, elevation and tilt.
1. Press MENU on the remote control to bring up the Main menu. 2. Select Assistance, then Dish Pointing. 3. Select Enter ZIP Code. 4. Enter the ZIP Code for the satellite dish antenna installation location. 5. Record the elevation, azimuth, and tilt (oval satellite dish only) numbers below. Elevation ____________ Azimuth ___________
How to point your satellite dish. To receive DIRECTV broadcast signals, your satellite dish must be correctly positioned. This tool can help you position your DIRECTV dish on your own. Start by entering your five-digit ZIP Code below.
When you subscribe to DirecTV and receive your satellite dish, be sure to aim it properly to receive a strong signal. A DirecTV professional installer can handle this task, or you can do it yourself. The main necessity is the left-to-right positioning coordinates known as your azimuth and elevation.
