Search results
18 paź 2011 · Go to www.dishpointer.com and put in your location (you can select the photo version if you like) and the dish type. With the HR24, that would likely be either Directv SL3 or SL5. The result will give both true and magnetic. Set the elevation and tilt.
16 lis 2012 · Directv receiver says 60 tilt 36 elevation. Messing with the tilt gets me 101/110 or 110/119 at the same time but I cannot get 101/110/119 at the same time which means my tilt must be off. Need the setting for zip code 256xx.
9 lip 2023 · DirecTV is shutting down their MPEG-2/SD-only feeds. This affects a lot of RV users as most of the time their dish is out dated, and occasionally the box. With your HR54 (3rd generation Genie) you have about the newest which cannot use the old dish. So compatibility should not be an issue.
23 mar 2019 · You can try the following procedures in the links below: let’s turn these notifications off. To do that, use your handy Cortana / Win search feature and search for “Notifications“. The default choice is what you want: “Notifications & actions settings”.
Your TV is likely not working well and may have a "no signal" message displayed. Attempt a simple power cycle to clear this message. After cycling the power, access the settings and select "view signal strength." Choose "signal meters_"_ and each transponder will test for signal.
22 wrz 2017 · Leave the screen on the “Dish Pointing” menu. Check that the elevation indication is aligned to the elevation you wrote down. Verify that the azimuth setting and tilt on the dish is correct as well.
How to point your satellite dish. To receive DIRECTV broadcast signals, your satellite dish must be correctly positioned. This tool can help you position your DIRECTV dish on your own. Start by entering your five-digit ZIP Code below.
