Search results
18 paź 2011 · Go to www.dishpointer.com and put in your location (you can select the photo version if you like) and the dish type. With the HR24, that would likely be either Directv SL3 or SL5. The result will give both true and magnetic. Set the elevation and tilt.
16 lis 2012 · Directv receiver says 60 tilt 36 elevation. Messing with the tilt gets me 101/110 or 110/119 at the same time but I cannot get 101/110/119 at the same time which means my tilt must be off. Need the setting for zip code 256xx.
The Direct TV Satellite dish works great when properly pointed. The dish requires a line-of-sight connection and the correct alignment angle to receive the best possible signal. Direct TV offers alignment as a service to optimize the angle, but you can also work the angle yourself.
22 wrz 2017 · Leave the screen on the “Dish Pointing” menu. Check that the elevation indication is aligned to the elevation you wrote down. Verify that the azimuth setting and tilt on the dish is correct as well.
1. Press MENU on the remote control to bring up the Main menu. 2. Select Assistance, then Dish Pointing. 3. Select Enter ZIP Code. 4. Enter the ZIP Code for the satellite dish antenna installation location. 5. Record the elevation, azimuth, and tilt (oval satellite dish only) numbers below. Elevation ____________ Azimuth ___________
11 wrz 2013 · Most options will reset themselves after the meter is turned off and on. The only one that sticks is the Favorites list. To turn the meter off, press and hold the OK button. If the meter is plugged in, unplug it, turn it off by pressing and holding the OK button then plugging the meter in.
To receive DIRECTV broadcast signals, your satellite dish must be correctly positioned. This tool can help you position your DIRECTV dish on your own. Start by entering your five-digit ZIP Code below.
