Search results
View and Download Muddy MTC100K instruction manual online. MTC100K scouting camera pdf manual download.
camera to a PC computer, turn the camera ON, press the MENU button once to change to SETUP Mode. Connect the USB cord (not included) between the USB out port and the PC computer.
on the camera. MOTION TEST: Allows you to determine distance and aim for your detection zone. When this setting is on, you can walk to your target area and move around. The red detection LED will light up when the camera detects you. The camera will arm when it does not detect motion for 30 seconds. DEFAULT SETTING:
1 sty 2024 · Most trail cameras have a test mode. Activate the test mode to check if the camera is detecting motion and capturing images properly. Consult your camera’s manual for instructions on how to enable test mode. Check Settings: Review the camera settings to ensure they are configured correctly.
EASY SETUP INSTRUCTIONS Open the camera cover and install four (4) AA batteries in the battery compartment. Follow the + and - polarities as indicated. Insert the SD Card into the SD Card slot as shown. You will hear an audible click when the card is fully inserted. Slide the Mode switch to the SETUP position, press the ENTER button
MANUAL BEFORE YOU BEGIN Download the Moultrie Mobile app to set up your camera, view your pictures and videos, remotely control settings, and more. TO GET STARTED, YOU’LL NEED: EDGE-NW NOTE: This camera has Built-In Memory. You do not need to purchase or install an SD card. 8 OR 16 AA BATTERIES THE MOULTRIE MOBILE APP EDGE CAMERA 1
With the camera facing up, open the compartment door. 1. LCD Ready Mode: The camera will automatically enter Ready Mode if a button is not pressed for greater than 30 seconds. The status lights will illuminate for a total of 2 minutes. 2. Check the battery level icon to ensure the batteries just installed contain the proper charge level.
