Search results
Easily adjusts to suit XLPE & EPR insulation materials on 0.5″ to 2.36″ (12.7 mm to 60 mm) cable diameters. 30 degree or 45 degree angle bevel models perform with a factory-set chamfer depth of 0.075″ (1.905 mm), adjustable from 0″ to 0.150″ (0 mm to 3.81 mm); 15-35 kV.
Chamfering tool creates a 45° bevel approximately 0.125″ (3.17 mm) in length. Easily adjusts to fit cable diameters from 0.65″ to 1.875″ (16.51 to 47.63 mm) Suited for XLPE insulations. Features safe, recessed blades to prevent injury & blade damage.
• Easily adjusts to suit XLPE & EPR insulation materials on 0.55″ to 2.36″ (14 mm to 60 mm) cable diameters • Performs a 30° angle bevel with a factory-set chamfer depth of 0.075″ (1.905 mm), adjustable from 0″ to 0.150″ (0 mm to 3.81 mm) • Features a replaceable, machined & ground tool steel blade. NEW. Compatibility. PART #
Just one tool for the complete range of medium voltage cables. Simple to handle and safe in use. This tool cuts the sharp edge of the removed insulation to avoid any damages of the push-on termination joints. Universal tool for preparing every cable insulation.
Easily adjusts to suit XLPE & EPR insulation materials on 0.55″ to 2.36″ (14 mm to 60 mm) cable diameters; Performs a 30° angle bevel with a factory-set chamfer depth of 0.075″ (1.905 mm), adjustable from 0″ to 0.150″ (0 mm to 3.81 mm); 15-35 kV; Equipped with safe, recessed blade to prevent potential injury & blade damage
The IC 1 and IC 2 chamfer 15 to 35kV cables and adjusts easily to fit different cable insulations including XLPE insulations. The complete operation takes 10 seconds or less and blades are recessed to prevent injury and blade damage.
Cable End Chamfering: Tool Type - URD Cable Insulation Chamfer Tool; Cable OD - 0.650 in - 1.260 in; Additional Information - Prepares XLPE Insulation (15kV - 35kV) for Pre-Molded Termination. Creates 45-deg bevel, approx 0.125" Long.
