Search results
4 lis 2012 · Definitions, online calculator and figures and tables with water properties like density, specific weight and thermal expansion coefficient of liquid water at temperatures ranging 0 to 360°C (32 to 680°F).
- Attenuation of Sound
Speed of sound in air at standard atmospheric pressure with...
- Electrical Conductivity
Electrical Conductivity of Highly Purified Water. Electrical...
- Oxygen
Normally dissolved oxygen from air in fresh water and sea...
- Salinity
Salinity is the saltiness or measure of dissolved salt in...
- Galvanic Series
Feed Water Treatment to Avoid Corrosion Make-up water to...
- Absolute
Figures and tables showing the enthalpy and entropy of...
- Water
Online calculator, figures and tables with water saturation...
- Specific Heat
Specific Heat Gases . There are two definitions of Specific...
- Attenuation of Sound
This document presents seawater property data from our library (web.mit.edu/seawater). Properties are listed as a function of temperature and salinity for the pressures, P = P0 , 7 MPa and 12 MPa. Here, P0 = 0.101325 MPa for t <= 100°C and for t > 100 °C is the vapor pressure of seawater.
As summarized in Table 7, the saline part of the Gibbs energy at normal pressure, ( S , T , p. 0 ) , represents the experimental thermal and colligative data for salinity from pure water to 0.12 kg kg−1 and for temperatures from the freezing point to 353 K in the region (C) of Fig. 1 [2].
9 gru 2023 · This page provides tables and a library of computational routines for the thermophysical properties of seawater. The properties given by these codes are those needed for design of thermal and membrane desalination processes. They are given as functions of temperature, pressure, and salinity.
Tables B-1 and B-2 present data for saturated liquid and saturated vapor. Table B-1 is presented information at regular intervals of temperature while Table B-2 is presented at regular intervals of pressure. Table B-3 presents data for superheated vapor over a matrix of temperatures and pressures.
For this procedure, only the following properties are provided: density, absolute vis-cosity, kinematic viscosity, and vapour pres-. In general, the water properties are a func-tion of temperature (t), pressure (p), and abso-lute salinity (SA). For fresh water, SA = 0.0.
Based on M = 0.96, the critical pressure coefficient was found to be −0.0697. A pressure coefficient below this critical pressure coefficient constitutes the supercritical region or the region of supersonic flow on the surface of the wing.
