Search results
Your Craftsman 2-cycle string trimmer uses a gas and oil mixture at a ratio of 40:1. This means 40 parts gas is mixed with 1 part oil. Refer to the chart below. When creating this mix, use unleaded gasoline with a minimum octane rating of 89 (mid-grade) and maximum ethanol content of 10%.
Craftsman recommends using a full synthetic 2-cycle engine oil, such as ISO-L-EGD and JASO M345 FD approved 2-cycle premium oil. Two-cycle Craftsman string trimmer fuel and oil ratio: Prepare the correct amount of fuel mix by consulting the table below.
Craftsman chainsaws with 2-cycle engines use gas and oil mixed at a 40:1 ratio. Unleaded gasoline with a minimum 89 octane rating and a maximum ethanol content of 10%. 2-cycle premium oil that is ISO-L-EGD and JASO M345 FD certified.
The ratio needed in the 2-cycle oil mix for your engine can be found in the equipment operator’s manual or on the engine label. If you cannot locate either, but know the equipment’s age, refer to the following: most handheld equipment manufactured before 2003 requires a 32:1 ratio; most handheld equipment made after 2002 uses a 40:1 or 50:1 ...
Craftsman 2-cycle blowers require a fuel consisting of a gas-to-oil mixture at a rate of 50:1: When creating this mix, use unleaded gasoline with a minimum octane rating of 89 (mid-grade) and maximum ethanol content of 10%.
40:1 mix ratio is specific to CRAFTSMAN® 2-cycle engines ; EXTENDED FUEL LIFE with stabilizer that specifically increases the life of mixed fuel ; IMPROVED ENGINE PERFORMANCE: Rigorously-tested, low-deposit formula improves engine performance ; LONGER ENGINE LIFE: Helps protect against harmful effects of ethanol-blended fuels
13 mar 1998 · gasoline must be mixed with a good quality 2-cycleair-cooled engine oil. We recommend Craftsman brand oil. Mix gasoline and oilat a ratioof 40:t (A 40:1 ratioisobtained by mixing3.2 ounces of oilwith 1 gallon of unleaded gasoline). DO NOT USEautomotive oil or boat oil. These oils will cause engine damage. When mixingfuel follow the ...
