Search results
modify the VLAN configuration or VTP, use the commands described in the following sections and in the Catalyst 4500 Series Switch Cisco IOS Command Reference. These sections describe how to configure VLANs: † Configuring VLANs in Global Configuration Mode, page 10-5 † Configuring VLANs in VLAN Database Mode, page 10-7
8 gru 2023 · The following are prerequisites and considerations for configuring VLANs: Before you create VLANs, you must decide whether to use VLAN Trunking Protocol (VTP) to maintain global VLAN configuration for your network.
You can use the vlan vlan-id global configuration command to add normal-range VLANs (VLAN IDs 1 to 1005) or extended-range VLANs (VLAN IDs 1006 to 4094). Configuration information for normal-range VLANs is always saved in the VLAN database, and you can display this information by entering the show vlan privileged EXEC command.
Use the vlan vlan -id command in global configuration mode to add a VLAN to switch S1. There are four VLANS configured for this lab: VLAN 10 (faculty/staff); VLAN 20 (students); VLAN 30 (guest); and VLAN
configure VLANs in global and config-vlan configuration modes, the VLAN configuration is saved in the vlan.dat files. To display the VLAN configuration, enter the show vlan command.
This chapter describes VLANs on Catalyst 4500 series switches. It also describes how to enable the VLAN Trunking Protocol (VTP) and to configure the Catalyst 4500 series switch as a VMPS client. This chapter includes the following major sections: VLANs, page 1-1. VLAN Trunking Protocol, page 1-7.
22 cze 2009 · 1) Issue the "configure terminal" command in order to enter the global configuration mode. 2) Create vlan using "vlan <number>" command and can assign name to vlan for description. 2) Issue the "interface [type] mod/port>" command in order to enter the interface configuration mode.
