Search results
I show what you need to do to mount a 7 speed cassette on to a bike wheel hub designed to fit 8, 9 or 10 speed cassettes. It involves mounting a 4.5mm spacer...
Rather than buy an entire new wheel, I chose to upgrade the freehub body. This is an easy project but it does require certain tools: a cassette removal tool, cone wrenches, and a 10m...more. I...
In this video, I explain exactly how to swap a 7 speed cassette and freehub to an 8 speed. Note: check for proper wheel/hub alignment with a dishing tool.
23 paź 2022 · You can use a 7 speed cassette with a spacer and I think you can remove a cog from the 8 and use it also. Make sure your bike can accept the 8 speed hub. Older 7 speed bikes will have 130mm dropout spacing.
7 lip 2022 · Yes, that will work perfectly. Freehubs with 8,9, and 10 speeds are identical. If you’re talking about a road bike, a 1mm spacer behind the Shimano cassette is required. If you’re talking about a mountain bike, it’ll go straight on.
15 wrz 2011 · "Any 7-speed Shimano Hyperglide Freehub will actually work with 8 or 9 sprockets, without any modification! What you need to do is to use 8 of the sprockets from a 9-speed cassette, with the 9-speed spacers -- or 9 of the sprockets from a 10-speed cassette.
7 sie 2024 · So, when you need to install an 8-10 speed cassette on these freehubs, you need to install a 1.75mm (1.85 is also acceptable) washer. The fourth is about 6-speed and 7-speed card fly. The overall height of these flywheels is lower, so when installing, you need to add a thicker washer.
