Search results
I show what you need to do to mount a 7 speed cassette on to a bike wheel hub designed to fit 8, 9 or 10 speed cassettes. It involves mounting a 4.5mm spacer...
9 sie 2010 · Could you fit without the 4.5mm spacer? What else could you put in to fill the gap.If you have a cassette that you don’t need, take it out and look for the c...
Rather than buy an entire new wheel, I chose to upgrade the freehub body. This is an easy project but it does require certain tools: a cassette removal tool, cone wrenches, and a 10m...more. I...
7 lip 2022 · Some people have expressed concern that a 7-Speed Hub doesn't support an 8-Speed cassette. Here you’ll find the conditions if you can really do it.
15 wrz 2011 · "Any 7-speed Shimano Hyperglide Freehub will actually work with 8 or 9 sprockets, without any modification! What you need to do is to use 8 of the sprockets from a 9-speed cassette, with the 9-speed spacers -- or 9 of the sprockets from a 10-speed cassette.
5 lut 2016 · Two ways to make this work perfectly are to use an 8 speed cassette, or if you have a 6/7 speed body only, use an 8 speed cassette and leave out a cog. (sheldon's "seven of eight" method). The derailleur pull ratio is the same but the shifter pull length and cassette spacing are different.
15 wrz 2011 · Is it possible to install an 8 speed cassette on a 7 speed hub (if for eg remove one coq) so it can work with 8 speed pods? Thanks
