Search results
Bulova Accutron watches were originally designed to use Mercury batteries of 1.35 volts, since they were the only type manufactured then. The pic (left) shows an original 214 all-metal "top hat" cell, before 387 cells with the plastic spacer became available.
Accutron 219 uses 344 Maxell SR1136SW. This kit delivers both the correct voltage and life up to a year. Replaces old mercury 343. Powered by a 1.5 volt multi-drain silver oxide cell with a special circuit that outputs the proper voltage required for these movements.
If your Accutron is currently running(or ran) correctly on a modern 1.5V watch battery this cell may not work in your watch without service from a watchmaker. ACCUCELL-1, This is the NEW power cell specifically designed for the 214 Accutron watches to replace the 387-mercury cell.
5 sie 2024 · Accutron 214 and 218 Movements need battery replacement every 12-14 months under normal operating conditions. This should be done by a Watchmaker or your local Jeweler but many of you wish to do it yourselves so here are my instructions:
INSTALLING a #387S (394/380) BATTERY IN YOUR ACCUTRON 214. Check the voltage of the new battery to be certain that it's not defective. It should measure 1.5V. If the battery is ok, install it by following these instructions carefully.
8 wrz 2015 · Bulova put a battery hatch on the 214. 218 and later have no hatch...the change was made probably in part, recognizing the contamination they were encouraging and probably also to reduce cost. If your 214 has not been serviced in 7-10 years, it should be serviced (which will include a new battery).
Accucell-1 Easy DIY Bulova Accutron Watch cell replacement for 214, 218, & 224 & 2300. THE solution for NLA battery 343 w/fresh silver-oxide battery
