Search results
antennas for 70, 33 and 23 cm. After build-ing them, I tested them on an antenna range and found that the measured performance was very close to the expected results. You’ll need to know a few things before running Yagi Calculator, such as: • operating frequency • boom diameter • element diameter • number of directors
8 mar 2024 · In summary, the "Custom UHF Yagi antenna build" details the process of designing and constructing a UHF Yagi antenna tailored for specific frequency ranges. It covers the selection of materials, dimensions for the elements (reflector, director, and driven element), and assembly techniques to optimize performance.
UHF building style with 6 mm elements. 6 mm solid rod as Element on 20 x 20 mm square Boom, upside down, M3 x 30 screw - with thread through the element. Use plenty of oil or special thread cutting lubricant for producing the tiny M3 threads into to 6 mm solid rod elements.
To mount the antenna on the roof, a J-bracket for mounting a satellite dish was used. The bracket was (is) fastened to a roof peak, and to the bracket was fastened a 2 metre length of 1.5″ diameter Aluminium pipe.
5 kwi 2015 · Yes, you can build your own Yagi antenna using common materials and tools. Our DIY guide provides step-by-step instructions and a list of necessary materials to help you create your own optimized TV antenna with Yagis.
In this tutorial i show you how to build a Yagi antenna for the 70 cm band (430-440 MHz). This antenna can be used to receive the ham satellite communications with any portable UHF receiver. Here i provide all build steps, with all dimensions you need.
Be it antenna placement results on aircraft, or motor vehicles, to air-flow / wind tunnel simulations for the motor industry. HFSS is even used to simulate radiation patterns of mobile/Cell phones when placed within a human hand.
