Search results
18 cze 2009 · FEATURES. Both the Z-92 and Z-62 are three-way, four-driver, bass reflex (i.e., ported) speakers, each featuring dual 6.5-inch mid-bass drivers, a 10-inch x 5-inch Neo10 planar ribbon midrange panel, and a 2.5×3.5-inch Neo3PDR planar ribbon tweeter coaxially mounted in front of the Neo10 panel.
18 lut 2010 · Specifications. Z-92 Speakers. Design: 3-way, Ported. Drivers: One 2.5″ x 3.5″ Ribbon Tweeter, One 10″ x 5″ Planar Midrange, Two 6.5″ Aluminum Cone Woofers. MFR: 32 Hz – 25 kHz. Sensitivity: (2.83v/1m) 91dB. Nominal Impedance: 4 Ohms. Crossover Frequencies: 500 Hz, 2.3 kHz. Power Handling: 200 Watts RMS. Connectors:: 5-Way Gold Plated Binding Posts
18 wrz 2020 · The "Slim" 8 inch planar at $39.90 seems a good candidate for open-baffle application. Some are reporting that the new GRS 3 tweeter actually sounding better than Neo 3 in prelim experiments. GRSslim8 by drjlo2, on Flickr
15 lut 2005 · The 520i, used as front left and right speakers, features a 50-inch-tall, planar magnetic line-source and two 6.5-inch cone drivers located in the base. This configuration allows for a claimed effective frequency range of 70 hertz to 20 kilohertz (–6 decibels, half space).
20 wrz 2011 · For surround channels, BG recommends the SS-303, a speaker that deploys its four ribbon drivers in a radically different layout. Its two 10-inch planar magnetic drivers angle toward each other, while its two 3-inch drivers, mounted in the V formed by the 10-inchers, angle away from each other.
12 sie 2008 · On the front of the Z-62, between two 6.5-inch aluminum-cone woofers, is a mid/tweeter assembly that I’ve never seen before. It includes two flat-planar drivers mounted one in front of the other. On top is the tweeter, measuring 3.5 inches high by 2.65 inches wide.
22 paź 2017 · The planar mid and tweeter are wired and ready for testing. The 14awg polyolefin insulated wiring has been very easy to work with for the drivers. Now to connect up to the Parasound A23 and see if we let out any magic smoke. If not, measurements. Next is wire up the two 3x8" servo sub arrays and HX300 amps.
