Search results
16 wrz 2022 · Resetting your TCM may help you to fix any issues with your automatic transmission system, and could even help fix your Audi if it is stuck in limp mode. Keep reading to find out more about the Audi TCM location, how to reset it, and how to get out of limp mode.
18 gru 2002 · The PCM is connected to sensors and solenoid valves in the transmission and electronically controls the shifting and lock-up of the transmission under various conditions, such as hard acceleration, normal, coasting, etc.
22 lut 2011 · Can someone please tell me where the Transmission Control Module/Unit is located in a 2007 A4? I've read in other forums that in previous model years it's located in the passenger floorboard - just want to confirm it's location in a 2007.
6 lip 2017 · The front strut drop down, and the air pump won't turn on. To eliminate the pump is bad, I gave the pump 12v, and the pump run. Then, I started checking on the adaptive suspension control unit (J197) and Convenience system central control unit (J393). I remove all the sockets of both module to check for continuity.
5 sie 2018 · Most modules do seem to be relating back to the lack of communication with the TCM or a fault in the powertrain bus. Is there anything that Audi could have done when carrying out the basic diagnostic session that would cause there to be no communication with the TCM at all.
22 mar 2021 · Occasionally these faults can be rectified by a simple Gearbox Oil change or software update, however, most generally the fault is caused by the Transmission Control Module (TCM) or more commonly known as the Gearbox ECU.
19 kwi 2024 · Transmission control module issue: The module responsible for controlling the transmission may have failed, causing reverse gear failure. Transmission fluid issue: If the fluid is contaminated or low, it can cause various transmission problems, including reverse gear failure.
