Search results
23 paź 2014 · The controller is set to switch 1.5 Amps of current (set by resistor R34 for port 3 and R20 on port 4). Two modes of operation are supported, CDP and DCP Auto modes. CDP mode, Charging Downstream port, is a standard USB 3.0 port that can supply 1.5 Amps of current.
• Up to four USB peripheral devices with cabling. • Up to four computers, each with an available USB port. Installation 1. Connect each of your USB Devices to a USB-A Port on the Switch. 2. Connect a USB port from each of the Host Computers to a USB-B Port on the Switch using the USB-A - USB-B Cables (included x 4). 3. Connect the Remote ...
13 lis 2018 · The US3344I is a 4-port USB3.1 Gen1 Industrial Switch that enables 4 computers to share and use USB3.1 Gen1 devices such as keyboard, mouse and other peripheral devices. The peripheral focus can be manually given to a particular computer by using pushbutton connected to the switch.
1. Connect the included power adapter to the USB hub. The power LED should light up solid. Supplying external power is optional, however to ensure each USB port is fully powered, connecting external power is recommended. 2. Connect the USB cable from the USB hub (type B port) to the host computer system. NOTE: If connected to a USB 2.0 host ...
4-portowy hub USB 3.0 z kontrolkami oraz włącznikami dla każdego z portów USB. Posiada możliwość podłączenia zewnętrznego zasilacza i korzystania z urządzenia jako huba aktywnego. Właściwości. 4-portowy hub USB z wyłącznikiem przy każdym gnieździe; Gniazda posiadają kontrolki w kolorze niebieskim
The TUSB8041 can be configured for power switched applications using either per-port or ganged power-enable controls and over-current status inputs. Power switch support is enabled by REG_5h (fullPwrMgmtz) and the per-port or ganged mode is configured by REG_5h(ganged).
The USB 3.0 Hub Design is a two-port USB 3.0 compliant hub. It provides simultaneous SuperSpeed and high-speed/full-speed connections on the upstream port and provides SuperSpeed, high-speed, full-speed, or low-speed connections on the downstream ports. The hub design provides power control for each downstream port and overcurrent protection.
