Search results
28 lip 2019 · You can use an active extension cable (referred to as a repeater), or an inexpensive powered USB hub to connect a standard additional cable. An active extension cable is basically a one-port USB hub built into the cable, as opposed to a passive extension cable that is just wires.
Use a standard six-foot (1.8-meter), 10-foot (3.1-meter) or 15-foot (4.6-meter) USB A/B cable to reach the desired distance. The U026-10M provides up to 150mA of power to the connected device.
The Plugable USB2-10M premium quality shielded USB 2.0 cable provides USB 2.0 performance (up to 60MB/sec) and power (up to 450mA) up to 10m (32ft) away. Our USB 2.0 extension cables have built-in signal repeaters to make sure you always have a quality USB signal at any distance.
Extends USB data transmission distance beyond the normal USB boundary. Supports data transfer rates up to 5Gb/s. Built in power adapter jack for supporting power hungry USB devices. Plug-n-play, no driver installation required. Fully shielded for error-free data transmissions.
19 gru 2023 · Solution 5 – Enable any Disabled USB controller. 1. Press Windows key + R key together to open run. 2. write devmgmt.msc in it and click OK. 3. Now, click to expand Universal serial bus controllers. 4. Check if there is any disabled USB device driver in the list. 5. If there are any, just right click and choose enable.
The active USB 2.0 extension amplifies the signal active like a hub. This provides an extension of the USB-cable according to the USB-specification. No external power supply required. The maximum extension depends on the power supply of the USB-device. No drivers are needed in Windows. USB 2.0 extension; transmission rates up to 480Mbit/s
The Manhattan Hi-Speed USB Active Cable with built-it repeater is fully-compliant with USB 1.1 and Hi-Speed USB 2.0 specifications to help devices operate at maximum performance. No external power or driver requirements are necessary.
