Search results
Aluminium 5052 (AlMg2,5):Cutting conditions, Recommended Carbide Grades, Equivalent Material Standards, and Chemical Composition.
Alloy 5052 is a non-heat-treatable 2.5% magnesium, 0.25% chromium alloy commonly available in flat rolled coil, sheet and plate from a wide range of producing mills. Like all the 5000-series high magnesium alloys 5052 has a fairly high strength and is hardenable to a significant degree by cold working, enabling a series of “H” tempers.
Marine grade aluminum 5052 H32 mechanical properties are listed in the following tables including yield strength (yield stress), ultimate tensile strength, shear strength, modulus of elasticity, young’s modulus, etc.
Machinability. The machinability of Aluminium / Aluminum 5052 alloy is rated as fair. This alloy can be easily machined in hard temper than in annealed form, and the quality of finish is better. Other than in very light cuts, all other machining should be done using oil lubricants.
Aluminum 5052-H32 Product Guide. Applications | Specifications | Related Videos | Mechanical and Chemical Data | Tolerances. Overview. 5052 is the aluminum alloy most suited to forming operations, with good workability and higher strength than that of either 1100 or 3003. 5052 is not heat-treatable, but is stronger than most of the 5xxx series ...
TECHNICAL DATA SHEET (TDS) PRODUCT: 5052 ALUMINUM ALLOY PLATE. Aluminum 5052 is a 5000-series aluminum alloy with higher amount of magnesium content comparing with 5005, and it is one of the higher strength non-heat treatable alloys (Annealed it is stronger than 1100, 3003 and 5005).
Machining. Machinability of 5052 is good whereby the workability improves as tempers harden. Accuracy of machining is managed with high speeds, ample lubrication, sharp tools, positive rakes, adequate clearance and continuous cutting.
