Search results
11 lis 2021 · Take the modulair 6 pin to molex cable out of the box of the PSU, plug the 6 pin in a 6 pin peripheral & sata socket on the PSU and plug in the molex of your fan splitter cable into a molex...
Our power supply units (PSUs) use an 8-pin EPS12v CPU cable that can be split into two 4-pin connectors. If you want to connect our PSU into a 4-pin EPS motherboard port, simply pull the two halves of the connector apart and connect one half into the motherboard port.
31 lip 2023 · The power connector itself is a Molex 8981 connector called the AMP MATE-N-LOK. Below is the pinout for the standard Molex 4-pin peripheral power connector as of Version 2.2 of the ATX Specification (PDF) .
The 4-Pin Molex Power Connector can be best described as a versatile powerhouse that facilitates the transfer of electrical power from the source to the desired component. It acts as a physical interface, connecting devices like hard drives, fans, and optical drives to the power supply.
Connects to: power connectors on SATA hard drives and SATA optical drives. Note: Always make sure that your SATA power connectors are fully inserted. Since it doesn't have a clip, this PC power connector tends to loosen and detach itself. 4. (4 Pin) Molex Connector. Also known as peripheral connector
27 lip 2023 · While the 8-pin configuration is backward compatible with the 4-pin ones, the 4-pin ones are not. To be more precise, you can plug the 8-pin connector to the 4-pin header on your motherboard, leaving one-half disconnected but not vice-versa.
From experience, it suffices to install the 8 pin connector on the left. The right 4-pin-connector is basically a redundancy that the CPU may draw upon under extreme load most likely only relevant when you do extreme overclocking.
