Search results
2N® 2Wire is a set of two convertor units that lets you connect any IP device installed at locations with no IP infrastructure to your network. Connect the device, such as an IP intercom, to one unit and a switch to the other unit.
Setting up a Private Network By default, the 2Wire gateway uses the 192.168.1.0/255.255.0.0 IP address range. You can select from two additional IP address ranges, or configure the network settings manually.
Translates a local network’s IP address to an external address maintained by the 2Wire gateway, effectively “hiding” the existence of a home network to the Internet. The 2Wire gateway then uses this external address to communicate with the Internet on behalf of devices connected to the local network.
View and Download 2Wire 2701HGV installation manual online. 2701HGV gateway pdf manual download.
Using legacy analog 2 wire cabling for IP intercom connection including PoE power supply. Long range Ethernet extension over 2 wires. Easy configuration, no IP address and network setup required, plug&play.
- IEEE 802.3 af/at Compliant 40 Watt PoE+ for IP intercom power supply - Easy configuration, no IP address and network setup required, plug&play - Calculated MTBF = 340,000 hours
2 paź 2012 · One option you have is to use Internet Connection Sharing with your PC. So leaving it configured as it is, with the LAN connected to the cable modem, and the wireless card connected to the wireless on the 2Wire (again, disable DHCP on this device).
