Search results
20 sty 2019 · Browse to 192.168.1.254 to get to the admin settings for the 2wire box. Go to Settings | System Info | Event Notifications and check enable detection of router behind router conditions . This setting is not on by default!
Make sure your 2Wire or Pace gateway and computer are connected by an Ethernet cable, and the connection is secure on both ends. Log in to your gateway on the connected computer.
The tool shows the IP address, subnet mask and gateway of your PC at the top left. Subnet mask (eg 255.255.255.0) and gateway (eg 192.168.0.1) can be taken over, for the DNS address you can take 8.8.8.8.
Resetting the gateway may cause your broadband connection to not function properly and may require reconfiguration of the system to reconnect the broadband service. 1. Open a Web browser and enter http://home, http://gateway.2Wire.net, or http://192.168.1.254 in the address line; the Home page opens. Page 93 CHAPTER 8: Finding Solutions 2 ...
Use the network adapter configuration software or Windows network connection wizard to set the network name (SSID) and encryption key (WEP). The network name is the word “2WIRE” (in all capital letters), followed by the last three digits of the gateway serial number (for example, 2WIRE110).
24 kwi 2024 · Enter http://192.168.1.254 in the address bar. Locate the Gateway Status section. The Wi-Fi network name is the Network ID (SSID). The Wi-Fi password is the Network Key.
10 wrz 2008 · I can access both the 2Wire 1800HG Gateway and the LinkSys WRT350N Wireless Router easily from any computer on the 192.168.2.0 network. Computers on the 192.168.2.0 network can see...
