Search results
Read permanent diagnostic trouble codes (PDTC) for Powertrain. Professional-level functionality for reading and clearing fault codes; monitoring, graphing, recording and playback of live data; performs bi-directional controls, routines, relearns and calibrations for vehicle on-board systems.
4 lis 2019 · After updating to Catalina 10.15.1, when I connect my camera via USB to copy photos, my Mac does not recognize the connection. I tried with 2 different cameras (Nikon D500 and Fuji T-20) - the cord and connections worked on a different (Windows) computer.
If you have an INNOVA scanner or code reader this Mini USB Cable will allow you to connect it to a MAC or PC for software updates.
12 lut 2014 · My camera is connected via USB. When I use ordinary mic connected to the mini-jack port (directly to the sound card) there's no problem at all. So the problem (I think) originates somewhere from translating audio signal from USB.
1 dzień temu · Make sure you are using a USB cable. Not a thunderbolt cable and not a USB charging cable. The USB data cable would have a USB-C connector on the ATEM end and whatever USB, type A or C on the computer end. With the ATEM connected, go to the Device Manager in the Control Panel.
29 cze 2016 · Open Apple Software Update for Windows and install available updates to get all the drivers. You will find additional details on the Mac models that support Windows 10 on the following link. You can check your computer model by selecting the Apple menu and choosing About This Mac when you are booted into OS X.
6 cze 2024 · Method 2: Check the USB Cable. If the USB cable is faulty or not supported by your camera or PC, then change it. Try using these 2 types of USB cables with a canon camera. USB cable (IFC-400PCU) for the [Mini-B] camera terminal. USB cable (IFC-600PCU) for the [Micro-B] camera terminal.
