Search results
STANDARD VALUE DECADE FOR 1% RESISTORS. *Standard Resistance value is obtained from the above chart by multiplying by powers of 10. BRANNON ELECTRONICS, INC.
STANDARD DECADE RESISTANCE VALUES. The following table lists four established number series which are used as preferred values in electronic design. Each series is shown under an associated value of tolerance %. The number series under the ± 10 % column is known as the E12 Series because there are 12 standard values within a decade range. ± 2 ...
Tabela rezystorów 0,1%, 0,25%, 0,5%. Tabela i wykres wartości rezystorów. Tabela rezystorów standardowych (oparta na preferowanych wartościach EIA).
Standard base resistor values are given in the following tables for the most commonly used tolerances (1%, 2%, 5%, 10%), along with typically available resistance ranges. To determine values other than the base, multiply the base value by 1, 10, 100, 1k, or 10k.
The standardization of resistor values serves several important purposes. When manufacturers produce resistors with different resistance values, these end up approximately equally spaced on a logarithmic scale.
Preferred number series for resistors according IEC 60063 are indicated below. Resistors with 20% tolerance. Download and print Resistors - Standard Colors Codes table
Electronics Tutorials about standard resistor values, preferred resistor values and E-series numbers for fixed value colour coded resistors
