Search results
25 maj 2006 · Technical corrections and clarifications to IEEE Std 802.11 for wireless local area networks (WLANs) as well as enhancements to the existing medium access control (MAC) and physical layer (PHY) functions are specified in this revision.
- 802.11n-2009 - IEEE Standard for Information technology ... - IEEE Xplore
Abstract: This amendment defines modifications to both the...
- 802.11n-2009 - IEEE Standard for Information technology ... - IEEE Xplore
29 paź 2009 · Abstract: This amendment defines modifications to both the IEEE 802.11 physical layer (PHY) and the IEEE 802.11 medium access control (MAC) sublayer so that modes of operation can be enabled that are capable of much higher throughputs, with a maximum throughput of at least 100 Mb/s, as measured at the MAC data service access point (SAP).
The IEEE 802.11n is a currently emerging Wireless Local Area Ne twork (WLAN) standard capable of providing dramatically increased throughput, as well as improved range, reduced signal fading, over the existing IEEE 802.11a/g WLAN standards.
IEEE 802.11n-2009 is an amendment to the IEEE 802.11-2007 wireless networking standard to improve network throughput over the two previous standards — 802.11a and 802.11g — with a significant increase in the maximum raw data rate from 54 Mbit/s to 600 Mbit/s with the use of four spatial streams at a channel width of 40 MHz.[1] [2]
IEEE 802.11 is a set of medium access control (MAC) and physical layer (PHY) specifications for implementing Wireless Local Area Network (WLAN) communication.
IEEE 802.11n-2009, or 802.11n, is a wireless-networking standard that uses multiple antennas to increase data rates. The Wi-Fi Alliance has also retroactively labelled the technology for the standard as Wi-Fi 4.
(This introduction is not part of IEEE P802.11n/D11.0, Draft Amendment to Standard for Information Technology-Telecommunications and information exchange between systems-Local and Metropolitan networks-Specific requirements-Part 11: Wireless LAN Medium Access Control (MAC) and Physical
