Search results
As part of Brownells' Firearm Maintenance Series, in this video, one of our gunsmiths goes through step-by-step how-to properly disassemble the SKS. Be sure ...
21 sty 2004 · Make sure the SKS carbine is pointed in a safe direction and then set the safety to the safe position (as shown in figure 1). Depress the magazine latch shown in figure 2 and open the magazine. Make sure the magazine is empty of cartridges. Leave the magazine open.
Before you can clean and restore your yugo SKS rifle, you need to disassemble some of its main components. To do this, follow these steps: Make sure the rifle is unloaded and the safety is on . Remove the magazine by pushing the magazine latch forward and pulling the magazine out.
All shooting is performed on state-approved firing ranges under the supervision of trained professionals. Imitation or the use of any acts depicted in these videos is solely AT YOUR OWN RISK. All...
Collecting and Shooting the SKS Rifle 3) Open the bolt. 4) Examine the bore and receiver and make sure the rifle is unloaded. 5) Once you are certain the weapon is safe, close the bolt as shown in figure 5. Note: Make sure weapon is cocked and safety lever is turned on before proceeding. 6) Flip the lever on the bolt rear slide cover.
21 kwi 2015 · The warnings and instructions in this manual should be read thoroughly so that you might fully understand how to properly use your SKS rifle. Accidental discharge can occur from careless handling and could cause serious injury, death or damage to property.
The Yugo Model 59/66 rifle is a gas-operated, integral box magazine-fed arm distinguished from other SKS variants by the prominent spigot-style grenade launcher permanently attached to the muzzle and a folding grenade launcher sight.
