Search results
Freezing Point of Seawater vs. Pressure and Salinity. Seawater properties like density, saturation pressure, specific heat, electrical conductivity and absolute viscosity.
- Attenuation of Sound
Salinity - salt content - of fresh, brackish and sea water....
- Electrical Conductivity
Electrical Conductivity of Highly Purified Water. Electrical...
- Oxygen
Oxygen - Dynamic and Kinematic Viscosity vs. Temperature and...
- Salinity
Salinity is the saltiness or measure of dissolved salt in...
- Galvanic Series
Salinity of Water Salinity - salt content - of fresh,...
- Absolute
Convert between viscosity units like Centiposes,...
- Water
Water - Dynamic (Absolute) and Kinematic Viscosity vs....
- Specific Heat
Specific Heat Gases . There are two definitions of Specific...
- Attenuation of Sound
This document presents seawater property data from our library (web.mit.edu/seawater). Properties are listed as a function of temperature and salinity for the pressures, P = P0 , 7 MPa and 12 MPa. Here, P0 = 0.101325 MPa for t <= 100°C and for t > 100 °C is the vapor pressure of seawater.
Online Water Viscosity Calculator. The calculator below can be used to calculate the liquid water dynamic or kinematic viscosity at given temperatures. The output dynamic viscosity is given as cP, mPa*s, Pa*s, N*s/m 2,lb f *s/ft 2 and lb m /(ft*h), while the kinematic viscosity is given as cSt, m 2 /s, and ft 2 /s. Note!
The kinematic viscosity of a liquid can be looked upon as the liquid's resistance to flow under its own gravity head. ν = η/ρ. Units for Kinematic Viscosity: ft 2 / s. mm 2 / s. m 2 / s. The following table defines the average Kinematic Viscosity for selected liquid fluids. The data shown yellow can be changes to recallate the selected variables.
For this procedure, only the following properties are provided: density, absolute vis-cosity, kinematic viscosity, and vapour pres-. In general, the water properties are a func-tion of temperature (t), pressure (p), and abso-lute salinity (SA). For fresh water, SA = 0.0.
Introduction. The properties of sea water are a function of temperature, salinity (i.e. total dissolved solids in g kg−1) and pressure. Physical Properties. In oceanographical work, density data is expressed in terms of 1000 (S –. 1) where S is the density relative to water at 4.0 °C.
Properties examined include density, specifi c heat capacity, thermal conductivity, dynamic viscosity, sur-face tension, vapor pressure, boiling point elevation, latent heat of vaporization, specifi c enthalpy, specifi c entropy and osmotic coeffi cient.