Search results
Unscrew the torch tip. Press igniter to see if there is a spark. If Yes: Replace tip and skip to Fuel. If No: Try the remaining troubleshooting steps, and if still no spark, Contact Customer Care at: 1-800-359-9678 or via email at Bernzomatic@WorthingtonIndustries.com.
- Product Support
Have a problem with your Bernzomatic torch? Contact Us....
- Product Support
Was having an auto ignition issue with the BernzOmatic TS8000 trigger start blowtorch. This simple fix will get the ignition working again.
How I repaired my Bernzomatic torch not lighting and igniting fuel.
My Bernzomatic decided to stop working so I decided to see if I could fix it. Lighting in this vid is bad and I apologize!
If torch will not light, but gas is flowing when you pull the trigger: 1. Remove torch from cylinder. 2. Unscrew removable burn tip. (see Fig. A) Burn tip Troubleshooting Guide TS4000, TS7000, TS8000 3. Check for spark. The igniter wire is located approx. 1/8” from the side wall. Pull the trigger and look for a spark from the igniter wire to ...
3 lut 2023 · Propane Torch Won’t Light or Stay Lit; Weak Flame; Difficulty Starting; Torch Does not Work Upside Down; Steps to Fix your Propane Torch. 1. Check The Ignition Wire; 2. Clean The Burn Tube; Replace Your Faulty Unit; Recommended Torches. Bernzomatic TS8000; Bernzomatic TS3500; Conclusion. Some Final Tips:
Have a problem with your Bernzomatic torch? Contact Us. Submit your comment or question via our contact form.