Search results
11 lis 2009 · We are working very hard to complete the Upgrade Package kit and to make it available to all so that it can be installed as soon as possible and at minimum inconvenience and cost. We'll be providing details on availability (how to order, etc.) later this week. First thing first: Removal of the wings.
12 lis 2009 · Remember, I am posting this info to show you how we installed the Upgrade Package to our Zodiac CH 601 XL. This is not a set of instructions or a teaching aid. I only recommend that you attempt drilling out the solid rivets if you have some experience working with bucked (conventional) rivets.
Zodiac XL Illustrated Parts Catalog. This new draft Parts Catalog makes it easy to identify parts of the Zodiac XL airframe (and to use with the new online parts ordering system). Additional resources for owners and operators of the Zodiac S-LSA (factory-built with Continental O-200). Nosewheel Bungee Installation Tool.
Locate aileron bellcrank and remove bolt at nearest cable connection. Locate original bellcrank support channel (6W6-10) and remove all rivets. Note: Channel flanges may be bent to facilitate access to rivets... If desired, bellcranks may be detached from their support angles (6W6-11) prior to removal of the rivets. Page 5 of 25.
13 cze 2016 · I have the following parts from my 601XL for sale: Pair of 12 gallon aluminum leading edge fuel tanks. Each tank comes with fuel level sensor, fuel cap and quick drain.
6 maj 2023 · Check the height in several locations along the span with the 0.020” shim. Using the same size drill bit as the hole diameter, back drill through the Spar into the Extrusion Angle and Cleco with long Clecos. With a 3/16” drill bit, expand the holes and Cleco.
6 maj 2023 · location. Use a #30 drill bit to drill the holes in the Z Channel. Position the Z Channel in the Fuselage and Cleco the bottom hole to a hole in the Side Skin near the
