Search results
19 paź 2016 · Installing the virtual COM port driver software on a computer makes possible CAT communication via a USB cable to the SCU-17 or an compatible transceivers. This will allow computer control of TX (PTT, KEY, FSK),
- Welcome to Yaesu.com
Radio Features: - HF/50MHz band 100W Compact SDR...
- Welcome to Yaesu.com
Radio Features: - HF/50MHz band 100W Compact SDR Transceiver. - SDR circuit configuration emphasizes Receiving Performance which is enabled by the same high-resolution A/D converter and FPGA used in YAESU high-end SDR transceivers.
SCU-17 Setup. Follow the instructions in this section if you're not using an FTDX-3000 or FT-991. Install the Virtual COM Port Driver and Virtual Soundcard Driver by following these instructions (do this before you connect the SCU-17 to your transceiver!)
11 lis 2018 · A updated USB virtual serial driver is available for a wide range of platforms from Silicon Labs.
Insure you have installed the Virtual Com Port drivers for your radio or interface before connecting the USB Cable to the computer. Connecting the cable before installing the proper driver could result in a "Generic" driver being installed by Windows which could result in issues later.
24 sty 2024 · We'll guide you through every step of connecting your Yaesu FT-5DE to Wires X using the SCU-57 cable. Whether you're a seasoned ham or just starting out, this video will provide you with clear, easy-to-follow instructions and tips to ensure a seamless setup.
• Firstly, connect the USB interface cable to a free USB port on your PC. If the PC does not already have the FTDI Drivers installed, please follow the FTDI installation guide and download the appropriate driver for your operating system. Once installed, connect to the 8 Pin Mini Din CAT port of your transceiver.
