Search results
19 paź 2016 · Installation Manual. Installing the virtual COM port driver software on a computer makes possible CAT communication via a USB cable to the SCU-17 or an compatible transceivers. This will allow computer control of TX (PTT, KEY, FSK), and the audio In/Out interface (except the FT-891). The COM port is also used for updating the transceiver firmware.
30 gru 2022 · Can you try installing our CP210x Universal Windows Driver v11.3 instead? https://www.silabs.com/documents/public/software/CP210x_Universal_Windows_Driver.zip . FYI, this version is compatible with Windows 10/11 and recommended by Yaesu: Virtual COM Port Driver Installation Manual
4 gru 2022 · There's two things that might have gone wrong: broken cable (that's literally the most common reason), missing components on the device, or. completely disfunctional USB stack on the device. In both cases, a hardware issue that we can't help you solve. Share.
16 mar 2020 · Hello, I am using Windows 10. I installed FT-70D Programmer ADMS-10 on PC. I connect FT-70D to PC, radio is in ADMS mode, then I try to install driver sw. On instruction manual of ADMS-10 at point 5 I read: Under "other devices" right click [Unknown devices]... (referring to Device Manager) I have not other devices in the list.
I've tried installing the drivers from the Yaesu site as well as the latest Silicon Labs drivers and still cannot get the dual com ports to be recognized when the USB cable is plugged in and the radio is turned on.
USB Capable. The FT-991 can be connected to a computer using a USB cable for CAT control and firmware updates, or the use of an integrated SCU-17 Interface Unit to support USB Audio In/Out, TX Control (PTT, Key, Shift). 100 Watts of Solid Performance.
If after connecting it displays "The driver was not installed correctly" or you see an unknown device/device name with a yellow exclamation mark. This means that the microphone driver is not installed correctly.
