Search results
21 mar 2022 · 1. Make certain that the router is powered on before it restarts completely. 2. The default IP address is 192.168.0.1 (or http://tplinkwifi.net ), and the default login username and password both are admin (all lower case).
7 cze 2022 · Press and hold this button for more than 5 seconds to reset the router to its factory default settings. WPS/Wi-Fi Press this button, and immediately press the WPS button on your device. The WPS LED of the router should change from flashing to solid on, indicating successful WPS connection.
The default wireless password is printed on the label of the router. If the password has been altered: 1. Connect your computer to the router using an Ethernet cable. 2. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router. 3. Go to Wireless to retrieve or reset your wireless password.
The preset SSID and password can be found on the label of the router. You can customize the wireless settings according to your needs. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router.
If you are using a TP-Link ID to log in, click Forgot password on the login page and then follow the instructions to reset the password. Alternatively, press and hold the Reset button on the back until all LEDs go off to reset the router, and then visit http://tplinkwifi.net to create a new login password.
To change the wireless network name and password on your TP-Link Archer C6 router, you need to access the router's web interface by typing the default IP address (usually 192.168.0.1 or 192.168.1.1) into the address bar of your browser.
18 lut 2024 · With the router powered on, use a pin to press and hold the RESET button on the back until all LEDs turn off. Log in to the web management page of the router, go to Advanced > System > Backup & Restore > Factory Default Restore, and click FACTORY RESTORE. The router will restore and reboot automatically. Q4.
