Yahoo Poland Wyszukiwanie w Internecie

Search results

  1. Shut down system before servicing: x Turn off water supply to the UV disinfection unit. x Disconnect all power to the UV disinfection unit. x Drain water from the system. EYE PROTECTION MUST BE WORN! Never look at an operating UV light with the naked eye. The light will burn and irritate unprotected eyes and skin. EYE PROTECTION MUST BE WORN!

  2. Shut down system before servicing: • Turn off water supply to the UV disinfection unit. • Disconnect all power to the UV disinfection unit. • Drain water from the system. EYE PROTECTION MUST BE WORN! Never look at an operating UV light with the naked eye. The light

  3. Check to ensure that the Torrium check valve or the external check valve is not allowing the pump to cycle – this is the usual cause of pumps overheating. If the static head is greater than 80% of the pumps shutoff head, the Torrium may not detect sufficient pressure drop to allow a start.

  4. View and Download ITT WEDECO Aquada installation and maintenance instructions manual online. WEDECO Aquada water filtration systems pdf manual download.

  5. 1. General & Applications. Disinfection by means of ultraviolet light (UV) is an efficient, economic and particu-larly environmentally friendly process. UV light kills pathogene microorganisms within a few seconds without leaving any residues, harmful by-products or affecting the sense of smell or of taste.

  6. The reset button is used to restart the Pumptec-Plus from a tripped condition. Pressing the reset button for less than ten seconds has no effect on the calibration.

  7. 11 cze 2024 · Resetting the water pump control box is an effective way to solve common water pump failures, especially when there is a short circuit, overload or voltage fluctuation. The following are detailed reset steps and precautions.

  1. Ludzie szukają również