Search results
Connect a device to your network over WiFi or using an Ethernet cable connected to your modem. This works best on a tablet or computer. 2. Open a web browser and type http://192.168.0.1 into the web address field. 3. Sign in to the modem settings (GUI) using your Admin Username and Admin Password, printed on the sticker. 4.
Basic Settings: Enable/disable the wireless radio, change the network name (SSID), view the current security type, key/passphrase, and WPS PIN for the modem; Wireless Security: Change the security type (WEP/WPA/WPA2) for your network
3 paź 2023 · Type in the default IP address of your wireless router in the address bar. Common default IP addresses include “192.168.0.1” or “192.168.1.1”. Consult your router’s manual or documentation for the specific address. You will be prompted to enter a username and password to access the router’s settings.
Connect a device to your network over WiFi or using an Ethernet cable connected to your modem. This works best on a tablet or computer. 2. Open a web browser and type http://192.168.0.1 into the web address field. 3. Sign in to the modem settings (GUI) using your Admin Username and Admin Password, printed on the sticker.
Does my modem support a single static IP? Yes, your CenturyLink modem will support a single static IP address. To configure a single static IP address, select the advanced setup tab then the WAN IP page in the left navigation pane.
Broadband Settings allows your service provider to configure the modem for the required network settings. DHCP Settings: DHCP Settings changes the IP addresses allocated for LAN devices. IPv6 LAN Settings: Ipv6 LAN Settings changes the LAN addressing schemes for IPv6.
Basic Settings provides a fast and easy way to change the primary network name (SSID) and enable/disable the wireless radio. If the wireless security type is changed using another page for the primary SSID, the set wireless security type will always be shown on the basic settings page.
