Yahoo Poland Wyszukiwanie w Internecie

Search results

  1. Use the encapsulation dot1q command in interface range mode to apply a VLAN ID to each subinterface within the range specified by the interface range command. The VLAN ID specified by the vlan-id argument is applied to the first subinterface in the range.

  2. User-configured VLANs have unique IDs from 1 to 4094. To create a VLAN, enter the vlan command with an unused ID. To verify whether a particular ID is in use, enter the show vlan id ID command. To modify a VLAN, enter the vlan command for an existing VLAN.

  3. Tagging Rules (Cont) On a given LAN segment VLAN, all frames implicitly or. Different VLANs on the different options. Access Link: Contain All frames on access. Hybrid Link: Contains and VLAN-unaware. All frames for some. All frames for other. for should explicitly. VLAN.

  4. bxin.cisco.com › lan › catalyst6500vlans - Cisco

    Note. You must enable the extended system ID to use 4096 VLANs (see the “Understanding the Bridge ID” section on page 28-2). dard. These VLANs are organized into several ranges; you use each range slightly differ. ntly. Some of these VLANs are propagated to other switches in the network when you use the VLAN Trunking Protocol .

  5. Learning Objectives. Upon completion of this lab, you will be able to: Cable a network according to the topology diagram. Erase the startup configuration and reload a switch to the default state. Perform basic configuration tasks on a switch. Create VLANs. Assign switch ports to a VLAN. Add, move, and change ports. Verify VLAN configuration.

  6. VLAN ID: identifies the number of the VLAN to which a frame belongs. The length of the VLAN ID is 12 bits. The value ranges from 0 to 4095. Because 0 and 4095 are reserved values of the protocol, the VLAN ID ranges from 1 to 4094. Network devices use VLAN IDs to identify the VLAN to which a frame belongs and

  7. In general, VLANs make it easier to design a network to support the goals of an organization. VLAN trunks are used to span VLANs across multiple devices. Trunks allow the traffic from multiple VLANS to travel over a single link, while keeping the VLAN identification and segmentation intact.

  1. Ludzie szukają również