Search results
In this video I show you the details on where the fittings, crush washer orientation, banjo bolt location, and line routing for your bulletproof turbo oil li...
24 gru 2019 · If you are removing your factory turbo inlet to upgrade it, this would be a perfect time to install the IAG oil lines, as getting to this banjo bolt might be impossible without intake manifold or turbo inlet removal.
In this video i go over some basic tips when installing your New Oil inlet feed and Line. A very important step when getting your turbo setup. Stay tuned for...
25 paź 2014 · Application: Duramax 6.6L Use this -6 AN fitting to connect the oil pressure feed line from the oil galley to the turbo. Benefits include increased oil capacity available for single or twin turbo applications.
2 sty 2013 · I went ahead and bought the pieces to build my own line from a local parts store. I used Russell -4 AN steel braid line and 2 -4 AN 90 degree hose adapters. I did away with the banjo fitting and just used the same fitting I got for the turbo inlet. Easy peasy to install once I got the old line off. So far has survived about 100 kms of driving.
4 kwi 2015 · The replacement feed line on 2011-2013 models includes two o-rings instead of one in addition to an integrated heat shield over the o-rings and a heat shield around the length of the line to prevent oil coking and reduce oil temperatures.
Twin Turbo Oil Line Install. Overview- Installation instructions for twin turbo oil feed and drain line. These instructions compliment all WCFab twin turbo kits for 2001-2016 Duramax. First check over the included packing list to be sure you have all items on the list in the bag. ’01-10 Duramax use a 30” long feed and drain line, while 2011 ...
