Search results
Using a tool holder with high precision coolant (HP) improves chip control and supports predictable tool life. This can be seen when changing from a conventional holder to a CoroTurn® HP holder without changing any cutting parameters. HP also gives room for increased cutting speed. Consider the following for predictable and productive
How to choose correct turning insert. There are many parameters to consider when choosing turning insert. Carefully select insert geometry, insert grade, insert shape (nose angle), insert size, nose radius and entering (lead) angle, to achieve good chip control and machining performance.
Now lets do the same procedure on the metal pantorouter. I could make wooden templates to mount on the aluminium template holder, but I'll show using the new segmented tenon templates. I start by looking up the appropriate row and column on the table that comes with the segmented tenon templates.
Students are introduced to ANSI turning insert nomenclature, tool holders and boring bars. They also learn about tools used for centerline machining such as twist drills, taps and reamers. Students finish with an introduction to the concepts of spindle speeds and feed rates.
Tenon length adjustable from 0" - 2". Reversible double edge carbide cutting blade capable of cutting hundreds of tenons before sharpening or replacement is required. Speed: Tenons cut less than 1 minute on 3" diameter material or less. The Tenonator II performs best on 3" diameter log stock or less.
2 mar 2024 · A quick reference for interpreting and remembering ISO turning tool holder nomenclature. Helps you remember just the critical parts of the name.
31 mar 2006 · First, make the tenon one-half the width of the rail you’re cutting it on (a 2″-wide rail would get a 1″-wide tenon). Second: If that tenon’s width would be greater than six times its thickness, then you should split it into two (or more tenons).
